BeamZ SHOWBAR 2x PAR, 2x Butterfly and R/G Laser DMX IRC

  • Kraunamos nuotraukos
    Kaina 459 

    The ultimate SHOWBAR kit containing 6 effects mounted on a DMX T-bar. The SHOWBAR is a pair of LED butterfly effect lights, a pair of LED pars, a powerful green and red laser and a strobe effect. The T-bar contains 4 built-in 1W high power white LEDs to create an amazing strobe effect. The T-bar can be controlled in a 2-channel easy DMX setting, 9 and 18 or 30-channel fully customizable setup. The T-bar is also equipped with an IR sensor for controlling on distance by remote control. You can also use the wireless foot-controller to simply swap between auto mode or sound activated mode. Link multiple units together with IEC-connector and DMX. The SHOWBAR can be mounted on a 38mm stand or you can use the mounting brackets on both sides to mount it to the ceiling.

    • 2x PAR Cans with each 6x 8W LED 4-in-1 RGB-UV
    • 2x Butterfly with each 4x 3W RGBW
    • 4x 1W White strobe effect
    • Laser Red/Green 70/100mW
    • DMX and stand-alone mode
    • 2, 9, 18 or 30 DMX channels
    • Master/slave synchronization
    • Sound activated with adjustable sensitivity
    • Auto mode with adjustable speed
    • Pre programmed shows
    • DMX in-/output via 3-pin XLR
    • IEC-connector in-/output
    • Control panel with LED display
    • Wireless footcontrol
    • IR-Remote control
    • Complete with bag
    • Supplied without stand

    Laser Class 3B
    Laser Green 100mW
    Laser Red 70mW
    DMX channels 2, 9, 18, 30
    No. of LEDs 12x 8W LED 4-in-1 RGB-UV, 8x 3W RGBW, 4x 1W Strobe
    Power supply 100-240VAC / 50-60Hz
    Dimensions 1200 x 220 x 400mm
    Weight 12kg